• Quality production according to international standards
• Products utilised the automobile industry, in manufacture of machines and instruments, electrical products and lighting technology, sanitary technology
• Use in attractive new buildings as well as reconstruction of historic buildings
• Intermediate products for manufacture of small utility objects, jewellery, musical instruments, locks and keys, sport ammunition

Copper strips and sheets for industrial processing

• a wide range of possible applications in view of electrical and thermal conductivity
• suitable for manufacture of components for the electrical industry and telecommunications, automation and vacuum technology.

Dimensions

Thickness: 0.1 – 4.0 mm, sheets max. 3.0 mm, hot rolled sheets and plates 5 – 150 mm

Note: 0.1 – 0.2 mm only for selected conditions

Width: 6.0; 8.0; 10.0 – 600 mm, for sheets 600 and 1000 mm

Internal roll diameter

100 mm, 300 mm, 400 mm, 500 mm

Roll weight

Cu-ETP: 0.96 – 4.50 kg/mm

Cu-OF: 0.96 – 1.44 kg/mm, in the case of welds the roll weight increases to max. 4.00 kg/mm

Brass strips and sheets for industrial processing

• application in the electrical industry, sanitary technology and ventilation technology including air-conditioning equipment
• for production of ornamental and artistic objects, jewellery, musical instruments
• material for production of ammunition

Dimensions

Thickness: 0.1 – 4.0 mm, sheets max. 3,0 mm, hot rolled sheets 5 – 150 mm

Note: 0.1 – 0.2 mm only for selected conditions

Width: 6.0; 8.0; 10.0 – 600 mm, sheets 600 and 1000 mm

Internal roll diameter

100 mm, 300 mm, 400 mm, 500 mm

Roll weight

Cu-ETP: 0.96 – 4.50 kg/mm

Cu-OF: 0.76 – 1.44 kg/mm, in the event of welds the weight of the roll is increased to 2.66 kg/mm max.

Copper strips and sheets for construction industry

• an easily processed product for manufacture of roof coverings, long-life roof and facade drainage systems
• possibility of harmonious matching with other construction materials both in modern architecture and in the renovation of architectural gems

Dimensions

Thickness: 0.50 – 3.0 mm

Width: 20.0 – 1000 mm, for sheets 670 mm and 1000 mm in 2000 mm length

Internal roll diameter

Width up to 670 mm: 300 mm, 400 mm, 500 mm

Width above 670 mm: 500 mm

Roll weight

Max. 3000 kg

Cuprila - profiled copper roofing

• roof covering for demanding application, for new buildings and renovation of historical roofs
• suitable for listed buildings and other buildings of historical significance
• can be used in industrial areas and demanding climatic conditions
• can be laid on full boarding as well as on battens , the distance between battens is 300 or 350 mm
• versatile use from the inclination of 14° and, if the profiled roofing is laid in one layer, from the spout to the ridge, the inclination can be as low as 10° if a protective water-insulation foil is used. If the roof area in the direction of the inclination is longer than 10 meters, in altitudes higher than 600 meters above sea level and in unprotected areas with fierce wind, we recommend increasing inclination by at least 5°.
• no surface treatment is necessary after installation and during the whole lifetime of the building
• there are no requirements on maintenance and patina on the surface is self-renewable if impaired.

Dimensions

Usable width: 865 mm

Length: production possible from 0.5 to 10 m

We recommend up to 8 m due to heat dilatation and transportation

Weight of 1m2 with overlapping

100 mm, 300 mm, 400 mm, 500 mm

Hmotnost svitku

5.90 kg/m2 for thickness of 0.55 mm

6.45 kg/m2 for thickness of 0.60 mm

Other copper and brass products – cups, strips for cups

• cups are produced as input semi-products for the production of ammunition
• according to the plan provided by customer

Packaging

In steel pallets of 500 kg

---

Contact information for details:

Telefon: +420 224 492 189
Fax: +420 224 492 761
E-mail: plachy@metalimex.cz